The “Bottom Line” on Bleaching 2008
Van B. Haywood, DMD
Bleaching options could involve any of three classes: in-office procedures, tray bleaching (called nightguard vital bleaching), or over-the-counter (OTC) products. Within each of these classes, there are variations in techniques, type and concentration of material, barrier technique, and duration of treatment. When considering which technique to choose, the dentist must consider the available literature on safety, efficacy, and cost. Each procedure has a risk-benefit ratio and a cost-benefit ratio. What follows is the "bottom line" of what we know in bleaching in 2008 in all three classes.
EXAMINATION FOR BLEACHING
No bleaching treatment should be initiated without a proper dental examination,1 which generally includes radiographs and determines a diagnosis for the cause of the discol-md-6oration. The examination should include an explanation to the patient of all their treatment options, as well as considering existing restorations—which will not bleach—and other esthetic needs.
It should be noted that there are several causes for discol-md-6oration (abscessed teeth, caries, internal or external resorption) for which bleaching will mask the indication of pathology but not resolve the problem. Other treatments will be required before or instead of bleaching.
All teeth do not reach the same whiteness. Rather, each tooth has its maximum whiteness beyond which it will not whiten, regardless of the technique or material.1,2 Teeth among different patients do not bleach at the same rate. Some will bleach faster than others (in a matter of days or a single appointment), while others may take an extended time (2 to 6 weeks or multiple in-office treatments). Once the rate of the tooth change is exceeded, higher concentrations of peroxides or reaction activations make no difference in the col-md-6or change.1,3,4
Peroxide goes through the enamel and dentin to the pulp in 5 to 15 minutes and changes the genetic col-md-6or of the dentin and the enamel, as well as removes stains.5,6 Because of the permeability of the tooth to peroxide, there is no need to etch teeth to improve permeability. Cracks are not a contraindication to bleaching, but a history of sensitivity along with frequent applications and higher concentrations of material contributes to sensitivity.1,7-10
Most teeth get more opaque upon bleaching, but some that are already translucent may become more translucent and may not appear to whiten. If the occlusion allows, placement of a lingual composite to block the translucency may improve esthetics.1 Lingual or occlusal amalgams on teeth in the esthetic zone may show through translucent teeth when bleached, and so these should be considered for replacement before bleaching.1,11 Existing mismatched composite restorations can require replacement after bleaching, but the dentist should wait at least 2 weeks (for low-concentration products) for shade stabilization and bond-strength recovery.1,12-14
Hydrogen peroxide is different from carbamide peroxide in composition (carbamide peroxide = hydrogen peroxide plus urea), concentration (10% carbamide peroxide has 3.5% hydrogen peroxide) and time of activity.1,15 Hydrogen peroxide products are active for 30 to 60 minutes, which is normal wear or application time.1,8 Carbamide peroxide products are active for 2 to 10 hours, which favor longer wear times, especially overnight.1,2,12
Carbamide peroxide products increase oral pH to above 7 and reduce plaque, as well as kill bacteria that cause tooth decay. Hence, there is no concern for small carious lesions being restored before bleaching unless they are sensitive or close to the pulp.16-19
Patients receiving higher concentrations of peroxide experience greater sensitivity, greater col-md-6or relapse after termination of bleaching, and require a longer wait time before bonding with composite resin. Some properties of dentin are never recovered with the highest concentrations, possibly because of the acidic nature of hydrogen peroxide.4,9,20-23
The eventual outcome of whitening is the same regardless of the material if the time is extended long enough, as the outcome is determined by the tooth not the product.1,4,24-26
The majority of research available is on 10% carbamide peroxide (trays) and on 35% hydrogen peroxide (in-office). Other concentrations and recommendations are extrapolations of this data and may or may not be valid.4,15,27,28
Reservoirs are not needed to bleach; they merely reduce the tightness of the tray. Teeth bleach just as quickly without the reservoir as they do with it. Scalloping is only needed with higher concentrations of peroxide, or patient/dentist concerns for tissue contact. However, if you scallop the tray, you will generally need reservoirs. Thermoplastic trays made by the dentist in the office for direct placement in the mouth may offer alternatives to traditional impression and tray fabrication, especially in youth.1,29-32
It is important to note that having a one-arch fee is desirable, because some patients may never bleach the mandibular arch. The American Dental Association (ADA) code for tray bleaching (09972) is per arch, not per patient.
Treatment Times for Tray Bleaching
Normal teeth take 3 days to 6 weeks, de-pending more on the individual’s tooth response than on the product used.1,33 Nicotine-stained teeth take 1 to 3 months of nightly bleaching with 10% carbamide peroxide.1 Tetracycline stained teeth take 1 to 12 months of nightly bleaching, with an average of 3 to 4 months, using 10% carbamide peroxide.1,34 Tray bleaching overnight is the most practical for tetracycline stained teeth. The prognosis for tetracycline staining depends on col-md-6or (different analogues give a different col-md-6or and gray is the most difficult to remove), and the location (the gingival is harder because of thicker and different dentin characteristics from the dentin in the incisal portion of the tooth).1,34-36 When bleaching tetracycline-stained teeth, a "pay as you go" approach of monthly fees for material is fair to both the patient and the dentist as the treatment time is unknown at the outset.
The long-term safety of extended bleaching times using low concentrations of carbamide peroxide is well established. Stability of tetracycline bleaching parallels normal teeth, which can be 1 to 10 years before any touch-up or retreatment is needed.1,15,37,38 Bleaching may or may not eliminate the need for veneers, but lighter teeth will make it easier to make veneers look natural.39,40
EFFECTS ON COMPOSITE RESTORATIONS
Composite restorations do not change col-md-6or and are not affected by low concentrations of bleaching materials.41-44 The dentist should wait 2 weeks after low-concentration (10% carbamide peroxide) bleaching before composite bonding to allow bond strengths to return to normal.1,45 The dentist should wait 2 weeks or longer for shade stabilization of lower concentrations of carbamide peroxide/hydrogen peroxide, but longer (up to 6 weeks) for higher concentrations of peroxide.1,46 Not all composite restorations will need replacement as a result of the metamerism effect of composite, but the patient should be informed of all possible replacements in their esthetic zone.
Long-term safety of tray bleaching has been established through 4- and 10-year recalls.47,48 Enamel is not significantly affected by low concentrations of bleaching material when compared to normal diet and other treatments, though fluoride in the product is helpful.49-56 Dentin may have some minor effects with higher concentrations of hydrogen peroxide.57-59 Review articles in both the United States and Europe of all safety papers published on bleaching have determined that low concentrations of peroxide are safe to use after a proper dental examination and do not cause cancer.15,60-64 However, use of chlorine dioxide as a bleaching agent has not been scientifically established as either safe or efficacious.
SINGLE DARK TOOTH
Tray bleaching works well on vital or non-vital single dark teeth, although single dark teeth seldom equal the non-damaged teeth with any bleaching technique. Bleaching all of the teeth as well as the single dark tooth may still leave a discrepancy between the teeth1 (Figure 1 View Figure).
Outside bleaching of any single dark tooth is best performed with a single-tooth tray made by removing the tooth molds on either side of the single dark tooth.1 This approach allows the dentist to see how well the dark tooth responds before trying to lighten the other teeth for the best col-md-6or match (Figure 2 View Figure and Figure 3 View Figure).
A combination of one internal bleaching/cleaning and continuation of external bleaching with the single-tooth tray is the most time-and outcome-efficient method. Final shade matching of the single dark tooth to the other teeth can be enhanced with internal placement of opaque white composite.1
The root portion of a tooth does not bleach very well with any technique because of the difference in the composition of the dentin toward the pulp and toward the apex, so gingival recession is better treated esthetically with periodontal root coverage.1
Bleaching of endodontically treated teeth may be done internally with 10% carbamide peroxide and sealed with cotton and Cavit™ (3M ESPE, St. Paul, MN) or some other provisional restoration. Cleaning out the pulp remnants and placing a base over the gutta-percha excavated 2 mm below the cementoenamel junction is standard procedure, as in the "walking bleach" technique.1 Materials can be changed weekly (Figure 4 View Figure and Figure 5 View Figure). Other variations involve an open chamber "inside-outside" bleaching with 10% carbamide peroxide or use of sodium perborate internally with no high concentration of hydrogen peroxide.65
WHITE SPOTS AND BROWN DISCOLORATIONS
White spots do not bleach, but may be less noticeable if the background col-md-6or of the tooth is lightened to avoid the contrast (Figure 6 View Figure). White spots may go through a splotchy stage during bleaching, but will generally return to baseline, so bleaching should be continued until the background tooth col-md-6or reaches maximum lightness (Figure 7 View Figure and Figure 8 View Figure).
Amorphous calcium phosphate (CCP-ACP) may be effective in lessening the white spots if the lesion is not more than one third through the enamel, and the surface is not glazed or fluoride-rich.66,67 Etching and abrasion may also be used to remove white spots (micro-abrasion or macro-abrasion), or to prepare the surface for CCP-ACP application.68-71 Brown discol-md-6oration is very responsive to bleaching, being successful approximately 80% of the time1,72 (Figure 9 View Figure and Figure 10 View Figure).
AGE FOR BLEACHING
Generally patients are candidates for bleaching when they are 10 years old or older, as that is when permanent teeth erupt. The primary teeth are generally milk-white already. If a young person has a problem with tooth discol-md-6oration, it is better to bleach the teeth than wait and have them deal with the embarrassment of the discol-md-6oration. Although young people have large pulps, they also have large apices and good blood supply, so sensitivity is seldom seen during bleaching. No pulpal damage has ever occurred with 10% carbamide peroxide.1,73,74 No line of demarcation will be seen on the unerupted part of the partially erupted tooth if bleached before full eruption.
Non-scalloped, no-reservoir trays are used because they seal better, use less material, and are more comfortable to wear.1 Thermoplastic trays may do well for mixed-dentition bleaching, and are cost-and time-effective.
The only indication for primary tooth bleaching is trauma darkening without pathology.75 Older patients’ teeth bleach well, although in cases of recession, the root surface does not respond well.1 In the author’s experience, patients older than 45 generally appear 10 years younger with whiter teeth and patients look most natural when the white sclera of their eyes is matched by the whiteness of their teeth.
Tooth sensitivity is the most common side-effect of bleaching.1,20,65,66,73,76,77 Sensitivity may be treated actively or passively, but at-home treatment is most favorable. Passive treatment involves reducing the frequency of application, the duration of treatment, or interrupting continuous application. Active treatment involves using a material with potassium nitrate in the product, applying potassium nitrate in the tray instead of bleaching material for 10 to 30 minutes when needed, and pre-brushing with a potassium-nitrate toothpaste for 2 weeks before bleaching initiation. Having patients wear the tray alone or with potassium nitrate before bleaching can also minimize their perceived pain response.8,77
Gingival sensitivity is related to higher concentrations of peroxide, tray irritations, and inherent patient sensitivity.1,20 In-office bleaching with higher concentrations of peroxide results in greater sensitivity, so 1 week should be allowed between multiple appointments for the teeth and tissues to rest.27,78,79 OTC products generally cause more gingival sensitivity than tooth sensitivity.80
One in-office treatment does not yield the same outcome as tray bleaching. The average is three in-office visits for maximum outcome, or some combination of in-office and tray bleaching to complete the bleaching process.1,3,27,81-83 The lights do not make a difference, but only give the appearance of whitening as a result of dehydration. There is an immediate col-md-6or relapse in 1 to 2 weeks that must be followed by either another in-office treatment or tray application to continue the whitening to completion.27,81,46,84-90 The best time to evaluate the success of in-office bleaching is at least 2 weeks after treatment (or longer), to allow time for the shade to stabilize.27
A combination of in-office and tray bleaching may shorten the time somewhat, but will also increase the cost and sensitivity to the patient. The outcome in combination bleaching is the same with or without the in-office treatment. Patients should be aware that the additional charge for in-office is their choice, not the dentist’s. Some major in-office systems are designed for in-office followed by tray bleaching (and possibly in-office again) to complete the process.
If the patient prefers in-office bleaching alone, appointments should be scheduled about 1 week apart to allow the pulp to rest from the insult. Often the recommendation is to premedicate with non-steroidal anti-inflammatory drugs before bleaching and during treatment to reduce tooth sensitivity.79
Etching of teeth before bleaching is not desirable, and has been shown to not make any difference because of the permeability of the enamel. Sealing teeth after bleaching is only helpful if the teeth are rough (to minimize surface stains) or have been etched, but does not maintain tooth col-md-6or. Polishing the teeth with composite polishing instrumentation may be more effective.7,10
There is some evidence that in-office bleaching with a barrier such as a plastic sheet or a tray is more effective than traditional in-office bleaching.89 New improvements in in-office bleaching with paint-on rubber dams, cheek and lip retractors, and lower concentrations of peroxide have made it safer for the dentist and the patient.1
There is a wide variety of products, including strips, wraps, trays, and paint-ons. Some of these will bleach teeth and some do not make a clinical difference in col-md-6or.91,92 The main concern for OTC products is the lack of dental examination before bleaching (Figure 11 View Figure). Those products that can be effective typically need some type of barrier to maintain the peroxide in place, so OTC strips, wraps, and tray products can be somewhat effective.
The European directive is that OTC products cannot be purchased without an examination and prescription by a dentist, to avoid masking signs of pathology (teeth darkened from abscesses, decay, or resorption) or improper use.1,15,63
Paint-ons are similar to dentifrice in efficacy, in that they do not change the col-md-6or of the tooth, but merely remove extrinsic stains. Some have been shown to etch the teeth.93
Differences between patient arch size and standardized OTC product designs that do lighten teeth may mean that all the patient’s teeth shown in their full smile will not be bleached.1
A comparison of the three classes of bleaching to determine the amount of bleaching needed for a six-shade change indicated that three in-office applications of 38% hydrogen peroxide achieved the same result as 1 week of 10% carbamide peroxide nightly or 16 days of daily application of 5.3% hydrogen peroxide on a strip.81 A comparison of the equivalent concentrations of hydrogen peroxide and carbamide peroxide in different wear techniques (day-wear of hydrogen peroxide strips, day wear of hydrogen peroxide trays and night-wear of carbamide peroxide trays) indicated that the night-wear was more efficient (more col-md-6or change per days of treatment) and that strips and day-trays had the same efficacy. However, all treatment choices should eventually achieve the maximum whiteness allowed by the tooth given enough treatment time.94 Whitening is best performed in a professionally supervised manner, with a proper examination and diagnosis, using appropriate materials for the patient and situation, with a fair fee for service.
A 10% carbamide peroxide treatment in a custom-fitted tray is generally the safest, most cost-effective, best-researched whitening treatment available. Other bleaching treatments may be indicated based on patient preference, lifestyle, finances, or other limitations, but all treatments require informed consent after presenting cost/benefit and risk/benefit ratios.1,27,54,83
For more information please view our What can i do about stained or discol-md-6ored teeth?